Homework 5 - Chapters 4 and 5

1. Under what circumstances might two or more wireless stations using MACA contention resolution transmit at the same time?
2. Would it be possible for any of the 802.11 protocols to use CSMA/CD (like Ethernet) instead of CSMA/CA for channel contention? Explain why or why not.
3. How does 802.11 allow both PCF and DCF nodes to exist within range of one another? Describe how the two modes coordinate in your answer.
4. Assume an 802.11g is transmitting 128 byte frames back-to-back at its maximum rate of 54Mbps. If each bit is flipped with a probability of 1x10^-6, how many frames per second will be damaged on average?
5. A common "WiFi" setup is to have an 802.11 access point plugged in to an Ethernet LAN. Explain what the access point has to do to handle the transition between the Ethernet and 802.11 halves of the LAN.
6. Can a Bluetooth device be in multiple piconets at once? If so, can it act as master in more than one piconet?
7. When using a spanning tree algorithm to determine the topology for bridges, why might one leave bridges in place that are not used in the current spanning tree?
8. In order to deliver IP packets to the destination host on an Ethernet LAN, the gateway router translates the IP address to a MAC address using ARP. Is ARP part of the data link layer or the network layer?
9. Do virtual circuit subnets need to use a routing algorithm that finds a path from any source to any destination? If so, at what point during a virtual circuit connection would this algorithm be needed?
10. Under what circumstances might a packet be delivered to the wrong destination or get lost in transit at the network layer?